JaLCDOI 10.18926/46995
FullText URL mfe_36_1_001_006.pdf
Author Kondou, Ryouji| Abe, Takeji| Tada, Naoya| Shimizu, Ichiro|
Abstract Change in crystal orientation and strain of individual grains during tensile plastic deformation are studied to clarify on the microscopic deformation behavior of polycrystalline copper. The orientation of grain is measured by electron backscatter diffraction (EBSD) technique in the scanning electron microscope. The principal strain of grain is also measured by obtaining the approximated ellipse of strain distribution. The deformation of grains dependent on their initial orientation and the rotation of the principal strain during uniaxial tension are clarified.
Keywords Polycrystalline Copper Plastic Deformation SEM EBSD Method Grain Orientation Crystal Orientation Map
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2001-12
Volume volume36
Issue issue1
Start Page 1
End Page 6
ISSN 0475-0071
language 英語
File Version publisher
NAID 120003497021
JaLCDOI 10.18926/15344
FullText URL Mem_Fac_Eng_OU_35_1.pdf
Author Abe, Takeji| Hualin Song| Akagi Yasuo| Shimizu, Ichiro|
Abstract Free surface of polycrystalline metal becomes roughened after plastic deformation. The surface roughening is closely related to the inhomogeneity of polycrystalline metals, that is, to the inhomogeneous plastic deformation of respective grains. In the present study, inhomogeneous deformation on the free surface of polycrystalline aluminum specimen during uniaxial tension is studied. The inhomogeneous deformation of grains in the central area of the free surface of specimen is observed by the laser scanning microscope, while the inhomogeneous deformation perpendicular to the surface is studied by the laser scanning microscope as well as the stylus measuring instrument. It is shown that the surface roughness and the strain of respective grains increase with the applied strain. Discussions are made on the change in the surface roughness, the strain in each grain and the slip-line angles with the applied strain.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2001-03-27
Volume volume35
Issue issue1-2
Start Page 1
End Page 8
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002307340
JaLCDOI 10.18926/14135
FullText URL Mem_Fac_Eng_39_1_7.pdf
Author Wang, Xiaoqun| Abe, Takeji| Tada, Naoya| Shimizu, Ichiro|
Abstract Roughening on free surface of polycrystalline metal during plastic deformation is closely related to the inhomogeneous deformation in the respective grain at the surface. Uniaxial tensile tests are carried out on annealed pure aluminum sheet specimens with various averaged grain sizes. The roughening is measured by a 3-dimensional stylus instrument to examine the roughness change in both sides of specimen surfaces at each strain. The irregularities on one side are reversed on the backside, when the averaged grain size is as large as the thickness of the specimen. Discussions are made on the relation between the surface shapes of both sides adopting the cross correlation factor. The strains of respective grains are also measured from the grain boundary shape before and after plastic deformation. There are some deviations in the strains of the grains and their standard deviation increases with the applied strain.
Publication Title Memoirs of the Faculty of Engineering, Okayama University
Published Date 2005-01
Volume volume39
Issue issue1
Start Page 7
End Page 15
ISSN 0475-0071
language 英語
File Version publisher
NAID 120002308149
Author 清水 一郎|
Published Date 1994-03-25
Publication Title
Content Type Thesis or Dissertation