| JaLCDOI | 10.18926/15410 |
|---|---|
| FullText URL | Mem_Fac_Eng_OU_26_1_9.pdf |
| Author | Uno, Yoshiyuki| Nakajima, Toshikatsu| Okada Minoru| |
| Abstract | Practical utilization of ram type electrical discharge machining in uninflammable fluid has been expected in place of inflammable kerosine type fluid for unmanned operation in a workshop. The electrical discharge machining performance in deionized water is experimentally investigated on the basis of the analysis of the crater generated by a single pulse discharge. The experimental analysis makes it clear that the electrical discharge machining performance in deionized water is greatly affected by the electrode polarity. The metal removal rate in the normal polarity machining is higher than that in reverse polarity machining, while the electrode wear rate in the normal polarity machining is greater than that in reverse polarity machining. Therefore the electrode polarity should be properly selected according to the purpose of machining. |
| Publication Title | Memoirs of the Faculty of Engineering, Okayama University |
| Published Date | 1991-11-30 |
| Volume | volume26 |
| Issue | issue1 |
| Start Page | 9 |
| End Page | 20 |
| ISSN | 0475-0071 |
| language | 英語 |
| File Version | publisher |
| NAID | 120002307319 |
| JaLCDOI | 10.18926/15411 |
|---|---|
| FullText URL | Mem_Fac_Eng_OU_29_2_13.pdf |
| Author | Dwianto Gatot| Osaki, Hirokazu| Kajihara, Yasuhiro| |
| Abstract | We propose a method to design the supplying method of parts to an assembly line. Three types of supplying model (Serial, Parallel, and Mixed) are proposed based on the relation between the area of part and that of the transportation equipment. The part is supplied by the pallet on which the all parts of one product are arranged or by the lot of one part. AGV or conveyor are used to transport the pallet. The supplying model is evaluated from the total transportation cost calculated from the price of the transportation equipment and of land. |
| Publication Title | Memoirs of the Faculty of Engineering, Okayama University |
| Published Date | 1995-03-27 |
| Volume | volume29 |
| Issue | issue2 |
| Start Page | 13 |
| End Page | 21 |
| ISSN | 0475-0071 |
| language | 英語 |
| File Version | publisher |
| NAID | 120002307903 |
| JaLCDOI | 10.18926/15383 |
|---|---|
| FullText URL | Mem_Fac_Eng_OU_30_1_89.pdf |
| Author | Totsuji, Chieko| Sanaka Yoshiaki| Totsuji, Hiroo| |
| Abstract | Based on the tight-binding method, electronic bands of the mixed perovskite oxides are calculated in order to develop the electronic theory of ferroelectric phase transitions in these mixtures which are difficult to describe within the phenomenological theories. Diagonal elements of Hamiltonian matrix of parent materials are assumed to differ by 0.1eV and mixtures are simulated by lattices of supercells containing 2(3) = 8 or 3(3) = 27 unit cells randomly assigned to either material. The width of the conduction and valence bands have maxima and the band gap has a minimum at intermediate mixing ratio. Results are in agreement with those of other analyses on random systems and even 2(3)-cell computation seems to serve as a first approximation for our purpose. |
| Publication Title | Memoirs of the Faculty of Engineering, Okayama University |
| Published Date | 1995-12-28 |
| Volume | volume30 |
| Issue | issue1 |
| Start Page | 89 |
| End Page | 97 |
| ISSN | 0475-0071 |
| language | 英語 |
| File Version | publisher |
| NAID | 120002307957 |
| JaLCDOI | 10.18926/15384 |
|---|---|
| FullText URL | Mem_Fac_Eng_OU_30_1_99.pdf |
| Author | Wang, Ming| Wada, Osami| Koga, Ryuji| |
| Abstract | A cylindric mirror was used, in place of a parabolic mirror, to collimate the crescent blue laser beam radiated from the Cerenkov SHG in channel waveguide configuration. The cylindric mirror radius is requested to be twice the focal length of the parabolic mirror. The focusing effect of the cylindric mirror in collimation can be compensated by slightly lifting the mirror in its normal direction. Under the condition that the mirror was declined by 5.56° and lifted by 25 μm, we got the collimated beam with divergence angle less than 1.3 mrad. In the focusing experiment, the collimated beam was focused with spotsize of 1.8 μm. The details on the analysis and experiment are reported. |
| Publication Title | Memoirs of the Faculty of Engineering, Okayama University |
| Published Date | 1995-12-28 |
| Volume | volume30 |
| Issue | issue1 |
| Start Page | 99 |
| End Page | 110 |
| ISSN | 0475-0071 |
| language | 英語 |
| File Version | publisher |
| NAID | 120002307418 |
| JaLCDOI | 10.18926/15385 |
|---|---|
| FullText URL | Mem_Fac_Eng_OU_27_1_1.pdf |
| Author | Uno, Yoshiyuki| Kubota, Shin-ichiro| Nakajima, Toshikatsu| Ogata, Kojiro| Tada, Nobuhiko| |
| Abstract | Direct patterning of copper coated ceramic circuit board is experimentally investigated with Q-switched Nd:YAG laser in order to shorten the time of the trial manufacture of electronic circuit board and to adapt the flexible design change. It is pointed out that the fast direct patterning the speed of which reaches about 100 mm/s is possible if the repetition frequency and the average power are selected properly. Furthermore cutting off and/or drilling of ceramic board are also possible under the condition that the repetition frequency is less than 3kHz. This technique makes it possible the mask1ess patterning of ceramic circuit board which has been widely used recently in place of conventional glass-epoxy or phenolic resin circuit board, and it leads to the shorter time limit of delivery as compared with the conventional end-milling method. |
| Publication Title | Memoirs of the Faculty of Engineering, Okayama University |
| Published Date | 1992-11-25 |
| Volume | volume27 |
| Issue | issue1 |
| Start Page | 1 |
| End Page | 10 |
| ISSN | 0475-0071 |
| language | 英語 |
| File Version | publisher |
| NAID | 120002307702 |
| JaLCDOI | 10.18926/15412 |
|---|---|
| FullText URL | Mem_Fac_Eng_OU_26_1_21.pdf |
| Author | Nozu, Shigeru| Inaba, Hideo| |
| Abstract | A numerical study is performed for the facilitated diffusion of carbon-dioxide in an ultrapure water film flowing downward along a vertical surface. The model adopted for the present work includes the effects of the reaction rate for the hydration of CO(2)in a liquid. Comparison of the total concentration of CO(2) for different film thickness indicates that the effects of the hydration is more remarkable for the thinner liquid film. |
| Publication Title | Memoirs of the Faculty of Engineering, Okayama University |
| Published Date | 1991-11-30 |
| Volume | volume26 |
| Issue | issue1 |
| Start Page | 21 |
| End Page | 26 |
| ISSN | 0475-0071 |
| language | 英語 |
| File Version | publisher |
| NAID | 120002307958 |
| JaLCDOI | 10.18926/15386 |
|---|---|
| FullText URL | Mem_Fac_Eng_OU_30_1_111.pdf |
| Author | Ye Ju| Tanaka, Masahiro| Tanino, Tetsuzo| |
| Abstract | Mutation is one of the important operators in genetic algorithm. In traditional genetic algorithm, mutation is activated stochastically. In this way it is unknown and cannot be controlled for which individuals to be mutated. Therefore, it is unavoidable that some good individuals are destroyed by mutation and then the evolutionary efficiency of the genetic algorithm is dampened. Owing to this kind of destructivity of mutation, the operator of mutation has to be limited within a very small probability, and the potentiality of mutation is consequently limited. In this paper, we present an evolutionary chain-based mutation and a control strategy of reasonable competition, in which the heuristic information provided by the evaluation function is well utilized. This method avoids the blindness of stochastic mutation. The performance improved in this method is shown by two examples, a fuzzy modeling for the identification of a nonlinear function and a typical combinatorial optimization problem-the traveling salesman problem. |
| Publication Title | Memoirs of the Faculty of Engineering, Okayama University |
| Published Date | 1995-12-28 |
| Volume | volume30 |
| Issue | issue1 |
| Start Page | 111 |
| End Page | 120 |
| ISSN | 0475-0071 |
| language | 英語 |
| File Version | publisher |
| NAID | 120002307635 |
| JaLCDOI | 10.18926/15387 |
|---|---|
| FullText URL | Mem_Fac_Eng_OU_30_2_9.pdf |
| Author | Sakakibara, Akira| Kanadani, Teruto| |
| Abstract | Fatigue strength of Al-Cu alloy was examined by a repeated tensile mode when the specimens were aged and reversion annealed. The specimen quenched from 723K and aged fully around room temperature showed fatigue strength which depended on the existence of soft layer, while the specimen quenched from 723K and aged in the same way showed fatigue strength independent of the existence of the soft layer. Fatigue strength of the specimen, of which the soft surface layer was removed, was the same for either quenching temperature. Fatigue strength became higher when the soft surface layer was thickened with reversion annealing for 600s at 323K after aging. The soft surface layer was thought to increase fatigue strength of the aged Al-Cu alloy as well as Al-Zn alloy. |
| Publication Title | Memoirs of the Faculty of Engineering, Okayama University |
| Published Date | 1996-03-29 |
| Volume | volume30 |
| Issue | issue2 |
| Start Page | 9 |
| End Page | 13 |
| ISSN | 0475-0071 |
| language | 英語 |
| File Version | publisher |
| NAID | 120002307694 |
| JaLCDOI | 10.18926/15388 |
|---|---|
| FullText URL | Mem_Fac_Eng_OU_27_1_11.pdf |
| Author | Hirashima Masao| Inaba, Hideo| |
| Abstract | To prevent freezing of road and aquaduct by extracting geothermal heat with two phase closed thermosiphon has been widely used in a cold area. Both heat transfer characteristics in the underground soil and function of the thermosiphon to extract geothermal heat have to be made clear for the purpose of the above system. This study is directed for the purpose to prevent freezing of fire hydrant and composed of the fundamental experiment and the empirical experiment. In the fundamental study, heat transfer behavior is studied experimentally in the small size filling bath representing the underground soil layer. After recording temperature distribution, heat transfer coefficient is measured, they are proceeded into the correlation between the dimensionless number of Nusselt, Rayleigh and Fourier. The fundamental study is described as the first report. |
| Publication Title | Memoirs of the Faculty of Engineering, Okayama University |
| Published Date | 1992-11-25 |
| Volume | volume27 |
| Issue | issue1 |
| Start Page | 11 |
| End Page | 26 |
| ISSN | 0475-0071 |
| language | 英語 |
| File Version | publisher |
| NAID | 120002307419 |
| JaLCDOI | 10.18926/15389 |
|---|---|
| FullText URL | Mem_Fac_Eng_OU_30_1_121.pdf |
| Author | Kuk Hun| Tanino, Tetsuzo| Tanaka, Masahiro| |
| Abstract | In this paper we provide some theoretical results on stability and sensitivity analysis in convex vector optimization. Given a family of parametrized vector optimization problems, the perturbation maps are defined as the set-valued map which associates to each parameter value the set of minimal points (properly minimal points, weakly minimal points) of the perturbed feasible set with respect to an ordering convex cone. Sufficient conditions for the upper and lower semicontinuity of the perturbations map are obtained. We also provide quantitative properties of the perturbation maps under some convexity assumptions. |
| Publication Title | Memoirs of the Faculty of Engineering, Okayama University |
| Published Date | 1995-12-28 |
| Volume | volume30 |
| Issue | issue1 |
| Start Page | 121 |
| End Page | 131 |
| ISSN | 0475-0071 |
| language | 英語 |
| File Version | publisher |
| NAID | 120002307414 |
| JaLCDOI | 10.18926/15390 |
|---|---|
| FullText URL | Mem_Fac_Eng_OU_27_1_27.pdf |
| Author | Hirashima Masao| Inaba, Hideo| |
| Abstract | Heating and refrigerating technique such as snow melting of road and cold storage by utilizing temperature difference between underground soil and atmosphere is widely used[1-4] in a cold area. In the 1st Report, heat transfer characteristics of two phase closed thermosiphon for extracting geothermal energy is studied fundamentally. In the empirical study, heat extract rate is measured in connection with the change of atmospheric temperature utilizing real two thermosiphons on the site. Temperature distribution on the surface of the thermosiphon and underground soil around it is also measured. Based on the data of the empirical experiment, it is confirmed that prevention of freezing for fire hydrant can be achieved by geothermal heat utilizing two phase closed thermosiphon. Present paper describes the heat transfer behavior of the thermosiphon as the 2nd report. |
| Publication Title | Memoirs of the Faculty of Engineering, Okayama University |
| Published Date | 1992-11-25 |
| Volume | volume27 |
| Issue | issue1 |
| Start Page | 27 |
| End Page | 32 |
| ISSN | 0475-0071 |
| language | 英語 |
| File Version | publisher |
| NAID | 120002307336 |
| JaLCDOI | 10.18926/15392 |
|---|---|
| FullText URL | Mem_Fac_Eng_OU_27_1_45.pdf |
| Author | Kagawa, Naoki| Wada, Osami| Hai, Xu| Koga, Ryuji| Sano, Hiroya| Inubushi, Kazuyuki| |
| Abstract | A prototype device based on the tunable diode laser absorption spectrometry was constructed and the atmospheric methane concentration near the terrain in a rice paddy field was measured. An open optical path of 50 m length was employed along with a PbSnTe diode laser. Diurnal change of methane density with 30 seconds temporal resolution was recorded associated with meteorological parameters. A feasibility was proven for a practical application for in situ study of atmospheric methane. |
| Publication Title | Memoirs of the Faculty of Engineering, Okayama University |
| Published Date | 1992-11-25 |
| Volume | volume27 |
| Issue | issue1 |
| Start Page | 45 |
| End Page | 53 |
| ISSN | 0475-0071 |
| language | 英語 |
| File Version | publisher |
| NAID | 120002307877 |
| JaLCDOI | 10.18926/15413 |
|---|---|
| FullText URL | Mem_Fac_Eng_OU_29_2_23.pdf |
| Author | Kajihara, Yasuhiro| Osaki, Hirokazu| Dong Rui| |
| Abstract | A method for reducing the variety of parts is proposed. The variety of parts in a product and the variety of parts among products are evaluated in consideration of some factors that influence the production cost. Rules are formulated for selecting parts which should be eliminated or whose designs should be changed to reduce these varieties. An expert system is developed based on this method for reducing the variety of parts. |
| Publication Title | Memoirs of the Faculty of Engineering, Okayama University |
| Published Date | 1995-03-27 |
| Volume | volume29 |
| Issue | issue2 |
| Start Page | 23 |
| End Page | 27 |
| ISSN | 0475-0071 |
| language | 英語 |
| File Version | publisher |
| NAID | 120002307257 |
| JaLCDOI | 10.18926/15396 |
|---|---|
| FullText URL | Mem_Fac_Eng_OU_27_1_81.pdf |
| Author | Abe, Hirofumi| |
| Abstract | This paper aims to examine the impact of JR (Japan Railways) Seto Ohashi Line on residential land value. First, the study examines the trends in land value in the area along JR Seto Ohashi Line by applying the area comparison method. The method estimates the effect of JR Seto Ohashi Line on residential land value by comparing land values between the study area and the Okayama Metropolitan Area. Second, the property value method is applied to measure the effect of railroad construction. The effect is estimated with a residential land-value regression, which is calibrated using land value data along the Seto Ohashi Line. Finally, the results are compared with the empirical studies in the Greater Tokyo Region, and various features of the impact of railroad construction on land value are identified. |
| Publication Title | Memoirs of the Faculty of Engineering, Okayama University |
| Published Date | 1992-11-25 |
| Volume | volume27 |
| Issue | issue1 |
| Start Page | 81 |
| End Page | 92 |
| ISSN | 0475-0071 |
| language | 英語 |
| File Version | publisher |
| NAID | 120002307856 |
| JaLCDOI | 10.18926/15419 |
|---|---|
| FullText URL | Mem_Fac_Eng_OU_29_2_49.pdf |
| Author | Ahmed, Anis| Taniguchi, Shinji| Wada, Osami| Wang, Ming| Koga, Ryuji| |
| Abstract | For weakly guiding dielectric waveguides, the eigenmode field distributions are calculated numerically with a simple algorithm. In this numerical method, the transverse sampling space can be chosen arbitrarily, and hence a narrow waveguide can be analyzed. The field satisfying scalar wave equation is expressed by the discrete Fourier transform and the mode eigenvalues and eigenfunctions are calculated by solving an eigenvalue equation numerically. The validity of this method is checked for 2-D waveguides having step and parabolic or square index distributions. It is found that for the well guided TE modes of the slab waveguide, the accuracy of this method is remarkably good, but some discrepancies are found if the mode is near cut off. In the problems where the normalized guide index b is small, caution should be taken in applying the results of this numerical method. |
| Publication Title | Memoirs of the Faculty of Engineering, Okayama University |
| Published Date | 1995-03-27 |
| Volume | volume29 |
| Issue | issue2 |
| Start Page | 49 |
| End Page | 55 |
| ISSN | 0475-0071 |
| language | 英語 |
| File Version | publisher |
| NAID | 120002307858 |
| JaLCDOI | 10.18926/15420 |
|---|---|
| FullText URL | Mem_Fac_Eng_OU_26_1_61.pdf |
| Author | Kawara, Osami| Danno Hideki| Kunimatsu Takao| |
| Abstract | Lake Biwa is the largest lake in Japan, and one of the most important fresh water resources. The Hino River is the fourth largest river among the rivers which flow into Lake Biwa. The eutrophication of the lake has been warned since the 1960s. In order to improve the water quality of the lake, to decrease the loads through rivers is inevitable. Therefore, it is needed to predict the effects of measures to control pollutant loads and the influence of development in the basin on the loads from rivers before developing the basin and taking measures. This paper deals mainly with the model of water quality management for the Hino River and the effects of the development in the basin on the water quality. The model was formulated considering loads from forests, rice paddy fields, households, housing land, industrial factories. Using this model, a calculation system by a microcomputer was developed and the influence of urbanization of the basin was discussed. |
| Publication Title | Memoirs of the Faculty of Engineering, Okayama University |
| Published Date | 1991-11-30 |
| Volume | volume26 |
| Issue | issue1 |
| Start Page | 61 |
| End Page | 73 |
| ISSN | 0475-0071 |
| language | 英語 |
| File Version | publisher |
| NAID | 120002307182 |
| JaLCDOI | 10.18926/15421 |
|---|---|
| FullText URL | Mem_Fac_Eng_OU_26_1_75.pdf |
| Author | Myojin Sho| Noguchi Hisahumi| Yamada Masahito| |
| Abstract | Four radials-single ring urban expressway network is priced and, simultaneously, optimized in its spatial formation under the constraint that a balance must be kept of revenue and expenditure. The model consists of three sub-models: road system, car trip generation-attraction and traffic diversion. Network performance is assessed on two criteria; trip number criterion on which the aggregate number of car trips diverted onto expressway is maximized and travel hour criterion on which the travel hours of car trips integrated over the road system; surface and expressway, is minimized. Optimization is tried by numerical calculation for some sets of parameters in the model. The results are summarized as follows; (1) simultaneous optimization of price and spatial formation of the expressway network is possible on each of criteria, (2) trip number criterion produces lower pricing and smaller network while travel hour criterion does higher pricing and larger network, (3) optimum solution lies in a delicate relation of price and spatial network formation that comes from the balance constraint. |
| Publication Title | Memoirs of the Faculty of Engineering, Okayama University |
| Published Date | 1991-11-30 |
| Volume | volume26 |
| Issue | issue1 |
| Start Page | 75 |
| End Page | 94 |
| ISSN | 0475-0071 |
| language | 英語 |
| File Version | publisher |
| NAID | 120002307318 |
| JaLCDOI | 10.18926/15422 |
|---|---|
| FullText URL | Mem_Fac_Eng_OU_29_2_57.pdf |
| Author | Totsuji, Hiroo| |
| Abstract | As plasmas with extremely reduced dimensionality, properties of one-dimensional classical plasmas are analyzed in the domain of strong coupling and static and dynamic structure factors and the plasmon dispersion relation are obtained. These plasmas may be realized in Penning traps with sufficiently strong confinement and also in semiconductor quantum wires under appropriate conditions. |
| Publication Title | Memoirs of the Faculty of Engineering, Okayama University |
| Published Date | 1995-03-27 |
| Volume | volume29 |
| Issue | issue2 |
| Start Page | 57 |
| End Page | 65 |
| ISSN | 0475-0071 |
| language | 英語 |
| File Version | publisher |
| NAID | 120002307838 |
| JaLCDOI | 10.18926/15423 |
|---|---|
| FullText URL | Mem_Fac_Eng_OU_26_1_95.pdf |
| Author | Kawakami, Hiroshi| Konishi, Tadataka| |
| Abstract | This paper describes a method to construct IDEA BANK automatically. IDEA BANK is the data base of the "function-structure module" which is utilized in systematic conceptual design from Value Engineering perspectives. The method based on the Machine Learning EBL technique was evaluated and implemented for the IDEA BANK using SUN workstation. The practical implementation of the IDEA BANK acquisition was discussed after elucidating the problem and solution of the EBL technique in engineering design. In the IDEA BANK system, the structural features of an existing article are analyzed by hierarchically organized domain specific knowledge to yield a systematic explanation of how they function and attain their design goals. The explanation resulted in a generalized version of the Functional Diagram used in Value Engineering from which "function-structure module" can be extracted systematically. |
| Publication Title | Memoirs of the Faculty of Engineering, Okayama University |
| Published Date | 1991-11-30 |
| Volume | volume26 |
| Issue | issue1 |
| Start Page | 95 |
| End Page | 108 |
| ISSN | 0475-0071 |
| language | 英語 |
| File Version | publisher |
| NAID | 120002307756 |
| JaLCDOI | 10.18926/15381 |
|---|---|
| FullText URL | Mem_Fac_Eng_OU_30_1_75.pdf |
| Author | Totsuji, Hiroo| Inoue, Yoshihiko| Kishimoto, Tokunari| Totsuji, Chieko| Nara, Shigetoshi| |
| Abstract | Molecular dynamics of the Yukawa system, the system of particles interacting via the Yukawa or the screened Coulomb potential, are formulated for various statistical ensembles and external conditions. The Yukawa potential smoothly interpolates the long-range Coulomb and the short-range interactions by adjusting a single parameter, the screening length. In order to reduce the effect of boundaries, the periodic boundary conditions are imposed and the deformations of the fundamental vectors of periodicity are taken into account. Ewald-type expressions for interaction energy, force, and kinematic pressure are given explicitly. |
| Publication Title | Memoirs of the Faculty of Engineering, Okayama University |
| Published Date | 1995-12-28 |
| Volume | volume30 |
| Issue | issue1 |
| Start Page | 75 |
| End Page | 87 |
| ISSN | 0475-0071 |
| language | 英語 |
| File Version | publisher |
| NAID | 120002307479 |
